![ironcad extrude through all ironcad extrude through all](http://www.tecnetinc.com/img1678.jpg)
If the edge of the selected face is curved or does not provide the desired orientation, you can create a datum axis. To choose a different orientation for the edge, click the arrow on the right side of the dialog box and choose an orientation from the list that appears. By default, the selected edge will appear vertical and on the right side of the Sketcher grid. The edge must not be perpendicular to the selected face. Select an edge and the orientation of the edge on the Sketcher grid.You can also set this custom origin as the default origin for all sketches in your session by toggling on Set as session default. If you selected Specify as the Sketch Origin method, specify the origin location by clicking a point in the viewport or by entering the three-dimensional coordinates of the origin in the prompt area.The selected face is highlighted in the viewport. For more information, see Using the selection options. If you are unable to select the desired planar face, you can use the Selection toolbar to change the selection behavior. If no suitable face exists, you can select a datum plane or an orphan element face. Select the planar face from which the cut will be extruded.If the current viewport contains a three-dimensional part, you must do the following: If the current viewport contains a two-dimensional or axisymmetric planar part, Abaqus/CAE enters the Sketcher and you sketch the closed profile of the extruded cut on the plane of the part. Select Session Default to use the custom origin you specified earlier in the session. Select Specify to define a custom sketch origin. Select Auto-Calculate to place the sketch origin automatically. Select one of the following options from the Sketch Origin field in the prompt area: If desired, specify the method you want to use to select an origin for your sketch of the extruded cut feature. For a diagram of the tools in the Part module toolbox, see Using the Part module toolbox. You can also create an extruded cut using the tool, located with the cut tools in the Part module toolbox. For more information, see Including twist in an extrusion, and Including draft in an extrusion.įrom the main menu bar, select Shape Cut Extrude.Ībaqus/CAE displays prompts in the prompt area to guide you through the procedure. Alternatively, Abaqus/CAE can expand or contract the cross-section along a specified draft angle as the cross-section is extruded. When creating an extruded cut in a three-dimensional part, you can select a center point and specify a pitch that Abaqus/CAE uses to twist the cross-section as it is extruded.
![ironcad extrude through all ironcad extrude through all](https://i0.wp.com/digiworlde.com/wp-content/uploads/2020/09/iron.jpg)
The cut always passes completely through the part. You create an extruded cut in a two-dimensional or axisymmetric planar part by sketching the two-dimensional cross-section of the cut directly on the plane of the part. Three methods for creating an extruded cut.